How To Use A High Pressure Washer And What Is The Correct Method Of Operation?

The high-pressure cleaning machine is to use the power device to make the high-pressure plunger pump produce high-pressure water to clean the surface of the object, and the dirt is peeled off and washed away to achieve the effect of cleaning the surface. Because of its high efficiency, energy saving, environmental protection,  and other characteristics, it is widely used in various industries. Pay great attention to safety issues when using, and operate in strict accordance with regulations and requirements. The high-pressure cleaner leaked electricity due to improper use, and people were electrocuted to death from time to time. Next, the cleaning equipment manufacturer will tell you how to use the high-pressure cleaner.
The correct operation method of high-pressure cleaner:

1. Preparation before starting

Check whether the screws and nuts of each part of the washing machine are loose before starting the machine. 30# or 40# oil has been added to the pump shaft box, the oil level must be checked (it is better to just overflow the oil mirror).

2. Inlet pipe connection

Put the water inlet hose on the water inlet connector of the pump body, then put on the hose clamp, and tighten the screw on the hose clamp to ensure that the connection is firm and airtight. Then depending on the water source, put the other end on the faucet or put it into the water supply pool (the water inlet must be fully submerged in water). The water inlet pipe needs a filter to prevent the inhaled impurities from damaging the high-pressure pump.

3. Connection of outlet pipe

Connect the piercing joint end of the high-pressure hose to the quick-change joint on the water outlet of the machine; connect the other end to the threaded joint on the water spray valve. See the structure diagram for the connection method (the connection method of the quick-change joint: just push the knurled sleeve back, and then push the joint flat). Note: The high-pressure water pipe should not be twisted, but should be straightened as much as possible.