How to maintain the High-Pressure Pump?

The High-Pressure Pump is a kind of equipment with a high frequency of use. In order not to affect the efficiency of use as much as possible, ensuring the long-term running time of the high-pressure cleaning pump has become another goal we should pursue.

1. It is the first priority to do it correctly according to the operating procedures, and ensure that the water pipe of the high-pressure cleaning pump is very sealed, and there must be no damage or leakage, so as not to cause a certain pressure burden on the equipment. If cavitation occurs during the operation of the equipment, the operation should be stopped immediately to avoid damage to the equipment. In addition, the same is true for operations with excessive traffic, and the time must not be too long.

2. If the high-pressure pump must run all the time, it is best to lubricate the bearing every 500 hours. If you can directly add a high-pressure oil gun, the lubrication effect will be ideal. No matter what kind of equipment, after a period of use, it will cause a certain degree of wear and tear, and the high-pressure cleaning pump is unavoidable. Therefore, if the equipment is obviously abnormal, it must be shut down for maintenance in time to avoid more serious consequences.

3. The last thing to remind everyone is to strengthen the maintenance of the equipment seals, especially their lubrication and cleaning, because any fine particles and sand will affect the smoothness of the parts, which is normal and even cause the parts to break Damage to dry grinding without a mechanical seal.