How To Maintain A Electric High Pressure Washer?

How to maintain an Electric High-Pressure Washer?

1. Routine maintenance - after each operation

1. Flush hoses and filters exposed to detergent to remove any detergent residue to help prevent corrosion.

2. Turn off the water supply to the high-pressure washer.

3. Trigger the servo gun lever to relieve all pressure in the hose.

4. Remove the rubber hose and high-pressure hose from the high-pressure washer.

5. Cut off the spark plug connection line to ensure that the engine will not start (for engine models).

2. Regular maintenance --- once every 2 months

1. Regular removal of fuel deposits from the fuel tank will extend engine life and performance. Fuel deposits can damage fuel lines, fuel filters, and carburetors.

2. When the high-pressure washer is not in use, a protective cover is specially designed for the pump to protect the high-pressure washer from corrosion, premature wear, and freezing, etc. At the same time, lubricate valves and seals to prevent them from sticking.

Electric:

1. Switch off the high-pressure washer.

2. Disconnect the high-pressure hose and servo gun rod from the pump.

3. Attach the valve to the pump guard and open the valve.

4. Turn on the washer; suction all contents of the tank into the pump.

5. Turn off the washing machine; the pressure washer can be stored directly.

Engine type:

1. Switch off the high-pressure washer.

2. Disconnect the high-pressure hose and servo gun rod from the pump.

3. Attach the valve to the pump guard and open the valve.

4. With the ignition on, pull the trigger cord; draw all contents of the tank into the pump.

5. The high-pressure cleaner can be stored directly.